Bulk Pricing
Qty 1 - 2
$46.90 / Unit
Qty 3 - 5
$41.90 / Unit
Qty 6 +
$36.90 / Unit
Deliver to
Store
The all new eSUN PLAÂ filaments are suitable to use on your FDM (Fused Deposition Modeling) 3D printer with little to no change to your regular PLA settings.
PLAÂ (modified PolyLactic Acid) is extracted and purified from corn grain for an environmentally friendly composition. It is low odour and users report a slight, sweet aroma while printing.
Features
- Good balance of strength, rigidity and toughness for strong impact resistance.
- 100% bio-degradable and FDA food safety approved.
- Ready to print on any open source desktop or industrial printer.
- Low shrinkage rate means a uniform diameter so you won't get any cracking or issues being brittle.
- Up to ten times stronger than standard PLA.
- Delivers exceptional performance consistently.
- The easiest to work with and most importantly USER FRIENDLY!
Printer Settings
- Best Printing Temperature:200-220℃.
- Bed Temperature:0-70℃.
- Printing Speed:30~90mm/s.
- Movement Speed :90~150mm/s.
Length
213 mm
Width
78 mm
Height
218 mm
Weight
1 kg
Packaged Volume
3.60899 l
Packaged Weight
1.458 kg
Packaged Type
Gift Box
Packaged Length
21.5 cm
Packaged Width
21.8 cm
Packaged Height
7.7 cm
Shipping Volume
4.43931 l
Discover more
eSUN Red PETG Filament 1kg 1.75mm
CAT.NO: TL4471
Available for delivery
eSUN Silver ABS+ Filament 1kg 1.75mm
CAT.NO: TL4475
Available for delivery
eSUN Blue PETG Filament 1kg 1.75mm
CAT.NO: TL4468
Available for delivery
eSUN Yellow PLA+ Filament 1kg 1.75mm
CAT.NO: TL4461
Available for delivery
Available for delivery
eSUN Gold PLA+ Filament 1kg 1.75mm
CAT.NO: TL4464
Available for delivery
eSUN Yellow PETG Filament 1kg 1.75mm
CAT.NO: TL4469
Available for delivery
eSUN White PETG Filament 1kg 1.75mm
CAT.NO: TL4466
Available for delivery
eSUN White ABS+ Filament 1kg 1.75mm
CAT.NO: TL4473
Available for delivery