Solar Power

This compact PWM solar charge controller is perfect for many small solar applications such as electric fences and trickle charging systems.

This PWM controller will control the charge from your solar panels and is suitable for sealed lead acid, as well as Gel/flooded type batteries.

A compact 3 stage PWM solar charge controller with a huge 30A rating and LCD display to keep an eye on your batteries!

Designed by German brand Kemo Electronics to efficiently charge 12V batteries using solar cells rated up to 10 Amps. This regulator is easy to wire up, prevents battery discharge during low sunlight conditions and indicates status via LED display.

Premium MPPT solar charge controller suitable for use with Lead Acid, LiFePO4 or LiNiMnCoO2 lithium batteries.

A intelligent 3 stage compact MPPT solar charge controller. Supports 390W at 12V or 24VDC arrays up to 780W.

This 20A PWM solar controller is truly designed for the outdoors with its IP67 rating, but still has all the features you need for your solar setup.

This PWM controller will control the charge from your solar panels and is suitable for sealed lead acid, as well as Gel/flooded type batteries.

Easily keep an eye on your solar setup with this flush mounted PWM controller, 12/24V system compatible and rated to a huge 30A.

Victron SmartSolar Charge Controllers MPPT 75/15 - 12/24V 15A with load output and Bluetooth

This 10A PWM solar controller is truly designed for the outdoors with its IP67 rating, but still has all the features you need for your solar setup.

Keep both your house battery banks or one house bank and your motor start battery topped up automatically!

Victron SmartSolar Charge Controllers MPPT 100/20 - 12/24/48V 20A with load output and Bluetooth

Capable of handling large solar arrays, this MPPT solar controller is able to charge a variety of lead acid and lithium battery banks.

Maximum Power Point Tracking (MPPT) for maximum efficiency.

Compatible with selected Powertech Charge controllers, this will allow you to control your solar setup from your Smartphone or tablet.

The remote Monitor provides an informative, user friendly display for compatible PowerTech solar controllers letting you easily monitor your system.

Remote for MP-3726 and MP-3728.Download the Invertek Warranty Card herePlease note this product is not carried in all stores. Please check ahead&...

Compatible with selected Powertech Charge controllers, this will allow you to monitor your solar setup from your PC.

With an massive 20 amp current handling, this switchmode solar panel regulator is lightweight, easy to install and does not require a heatsink. I...