Enables you to upgrade your KR-3141 robot with an additional ATMEL ATMEGA32 Microcontroller, which provides twice the clock frequency compare to the micro onboard the KR-3143 main board. Highly recommended for use as the master for complete control of the robot, and setting the main board in KR-3143 as slave for motor speed control via I²C-Bus expansion connectors. The module includes a microphone sensor allowing you to start the robot by clapping or making similar noise. A useful Piezo for generating simple melodies and can be used as a signal generator to indicate errors or state changes. Also features 4 status LED's, 5 buttons for selecting special functions and a display port suitable for connecting a 16x2 character Liquid Crystal Display.
• 1 x Expansion Module
• 2 x Flat ribbon cable with 14 way IDC Socket on each end with an overall length of 73mm
• 4 x 14 way Box Header
• 4 x brass standoffs
• 4 x nuts
• 4 x crews
• PCB dimension: 115(L) x 90(W)
