Your order can be delivered to anywhere throughout New Zealand.
* Freight delivery times stated are for average volume items with total order weight under 5kg. Additional delivery time may result for some deliveries. Contact the Techstore should you require more details.
Goods cannot be delivered to a post office box via an express courier service. If shipping to a PO Box you must select standard delivery during checkout.
Company policy is that we do not under any circumstances issue instructions to our couriers to leave deliveries unattended when no one is at the delivery location.
For unusually large or bulky orders our customer service staff may contact you if any additional freight costs are needed.
Transit goods insurance
If you wish to insure, it will cost $1 for every $100 value or PART THEREOF. In other words if your order is for $145.00 the insurance will be $2.00. This insurance covers goods DAMAGED in transit. We do not automatically insure unless you specify it during the checkout. If you don't select insurance you are NOT insured.
Our superb range of pure sine wave inverters is one that we don't change very often, in fact we have firmly resisted change sticking to the line if it ain't broke, don't fix it, and this has remained true for the last 5 years - the performance and reliability has been too good for us to consider changing. So when our factory started trying to push us onto this new range of pure sine wave inverters some time ago, we refused. That was until we started testing them!
This new range of inverters includes advanced control logic which provides standard protection (overload, high temperature, over/under input voltage, and output short circuit) as well as a host of additional features to provide improved performance and reliability under adverse conditions. The control logic checks inverter and load conditions at start-up before applying power. It also applies a soft start feature which near eliminates the risk of inverter overload when large appliances with high in-rush currents are used. Overload detection and prevention uses a three stage alarm which acts as a timed warning so you can decrease the load before the inverter completely shuts down. High temperature protection automatically shuts the inverter down when it reaches a predetermined temperature, then restarts once the temperature has dropped to a lower level. A power saving mode can also be activated to minimise battery drain when the AC output falls below a set power threshold; ideal for use on small appliances such as entertainment equipment. When the threshold is reached the inverter is switched to standby substantially decreasing the standby current draw.
This new range includes models suitable for a variety of mobile and permanent power installations. Ranging from 180 to 2000W, each model has been rigorously tested (and we MEAN rigorously tested!) to ensure the best performance for your application. All models feature a standard 230VAC mains outlet as well as a USB port for powering and charging USB devices.
MI-5710 2000W Pure Sine Wave Inverter • Current at no load: 960mA • Current in standby mode: 230mA • Power saving mode options: OFF, Input voltage: 12VDC • Efficiency: 84-91% • Output regulation: ±3% • USB output: 5VDC @ 500mA • Input connection: Heavy duty screw terminals • Remote control: Wired 5m on/off switch with status light • Output overload: Three stage alarm and shutdown • Thermal shutdown restart: Battery low alarm: 10.6VDC ± 0.3VDC • High battery alarm: 15VDC ± 0.3VDC • Input overload: Internal 360A fuse
Also available: MI-5702 360W Pure Sine Wave Inverter MI-5703 360W Pure Sine Wave Inverter MI-5704 800W Pure Sine Wave Inverter MI-5706 1100W Pure Sine Wave Inverter MI-5708 1500W Pure Sine Wave Inverter MI-5710 2000W Pure Sine Wave Inverter MI-5712 2000W Pure Sine Wave Inverter
NOTE: We DO NOT recommend that you use inverter products to operate fridges, air conditioners, or air compressors. Initial startup load for these items can greatly exceed the maximum output of the inverter and may result in catastrophic damage which will not be covered by warranty.