Control the speed and direction of a 4-pole stepper motor, rated between 5 to 18VDC @ 2 amps max, via your computer. Connected to the Parallel port of your PC and using the supplied software you can control the motor directly with the keyboard, or programmed for forward and backwards with an adjusted number of cycles. Requires a split rail DC power supply rated at motor specifications (between 5 and 18 volts) .
* Supplied with 3.5-inch disk.
* Dimensions: 120 x 50 x 23mm.
* Can be used with our stepper motors YM2752 & YM2753 (NOTE: These two products are now discontinued and cannot be purchased)
* Power handling: 1A nominal, 2A max