Micro servo motor, perfect for use with XC4618 Pan and Tilt bracket. Small enough to connect directly to an Arduino Board for experimenting.

Ideal for hobbyist, experimenters, robotics, replacement, etc.Torque: MediumOperating Volts: 1.5- 4.5VNominal Volts: 4.5VSpeed (no load): 12500rpm

Each motor briefly described below is a quality product with hardened drive shaft, sintered bearings and quality commutator brushes etc. They are idea...

Two phase stepper motor with 1.8° ±5% per step.

Ideal for hobbyist, experimenters, robotics, replacement, etc.Torque: LowOperating Volts: 1.5- 4.5VNominal Volts: 3VSpeed (no load): 12000rpmCurrent (...

Only slightly larger than the YG-2732, but with a massive increase in torque at 36rpm. Ideal for driving wheels or other traction devices.

A 5 pack of cables designed to fit servo motor projects.

This unit comes complete with a 3V 12,000 RPM motor- . It can be stepped down (with the consequent torque multiplication) up to six times as follows:-...

Small gearhead motor with bracket suits robotics and other maker applications that runs off 6VDC and has a gear ration of 1:30

Here's a great gadget that will allow you to add Greenpower to any of your projects. What we have here is a hand crank dynamo, pre-assembled but easily modified to be retro-fitted to existing equipment or added to new projects.

These metal gear servos are an excellent replacement for the standard servos commonly used in all 1/10th and many 1/8th scale remote control cars, or ...

This gearbox has a main output shaft exiting either side of the gearbox (to drive wheels, for example) and another single-ended shaft at 90° to the fo...

This compact unit will give up to a massive 2.1 kg.cm of torque at 70rpm. Current draw rises to a modest 390mA. SPECS: - Max Torque: 2.1kg.cm

A solenoid is a device comprised of a coil of wire, the housing and a moveable plunger (armature). More simply, a solenoid converts electrical energy into mechanical work.

- Torque 180 g.cm - Voltage (V): 12NO LOAD - Speed (rpm): 14500 - Current (A): 0.28AT STALL - Torque (g.cm): 372 - Curre...

Small and light motor particularly suited for RC aircraft and robotics projects.

Astonishing speed and power from these compact ferrite magnet types. All units feature hard steel drive shafts and long life design.

- Standard 48 step / 7.5° design. - Flange mount 3.0mm hardened steel shaft.Specifications: - Rated voltage: 12VDC - Rated curre...

Astonishing speed and power from these compact ferrite magnet types.All units feature hard steel drive shafts, long life design and are built in an IS...

As part of our new mechatronics range, we are proud to introduce 3 combined miniature motor/gearbox sets. The motors work equally well in forward or r...