PVA (PolyVinyl Alcohol) is a water-soluble material that is often used to print extremely complex shapes or support materials with a partially closed cavity model. Printed parts can be easily dissolved in warm water.
Suitable with use with PLA, TPU, PA (nylon) and other consumables materials. While many printers support material changing mid-print, it's recommended to use a multi-nozzle or IDEX based printer for best results.
Features- No harmful solvents required.
- Negates the risk of a blemished print surface from support material.
- Ready to print on any open source desktop or industrial printer.
- Delivers exceptional performance consistently.
Recommended Print Settings- Nozzle Temperature: 180 - 230°C (190°C recommended)
- Bed Temperature: 45 - 60°C
- Print Speed: 20 - 50mm/s
Note: Drying the material before printing (45℃/＞10hr) is advised to get optimum results, such as with the eSUN eBox (TL4430). It is also recommended to set the distance between the support and the model to 0, slow down print speed and turn off the fan for the first layer to bond well with the build surface.
