CRO Oscilloscope Probe Cable Set
- CAT.NO: QC1902
Bulk Pricing
Qty 1 - 1
$62.90 / Unit
Qty 2 - 4
$55.90 / Unit
Qty 5 +
$49.90 / Unit
Deliver to
Store
NOTE: This product has been replaced by QC1904. Click here for the replacement
This quality probe set consists of a 1.2m quality cord terminated at one end with a moulded-on stainless steel BNC connector and 1 x, 10x attenuator probe at the other end. An earthing lead 180mm long with alligator clip to connect to the probe at the other end is provided. Also provided is an adaptor that slides on to the probe to change the probe tip to a spring hook. Suitable as a replacement probe for most oscilloscopes.
Note: Not to be used for EHT (Extra High Tension) voltage.
Features:
Attenuation 10:1
- Bandwidth DC~40MHz (+/-1dB) DC~60MHz (±1dB)
- Input Resistance ~10Mohm
- Input Capacitance ~22pF
- Max Input Voltage: DC 600V
Attenuation 1:1
- Bandwidth DC~3MHz (+/-3dB) DC~6MHz (±3dB)
- Input Resistance ~1Mohm
- Input Capacitance ~180pF
- Max Input Voltage: DC 600V
Bandwidth
100.0 MHz
Vertical rise time
3.5ns
Cable length
1.4 m
Packaged Dimensions
17.0cm(Length) x 13.5cm(Width) x 1.5cm(Height)
30 August 2023
Thrill of the trace
They may inspire a sense of wonder and mystery, but oscilloscopes are fascinating and not that complicated once you get to know them
Read more
about Thrill of the traceDiscover more
Meter Probe Alligator Clips
CAT.NO: WT5220
Available for delivery
Multimeter Test Probes 93mm
CAT.NO: WT5316
Available for delivery
Multimeter Test Probes Shrouded Type
CAT.NO: WT5325
Available for delivery
Professional Cat IV Multimeter Probes
CAT.NO: WT5338
Available for delivery
Available for delivery
Digitech 20MHz USB Oscilloscope
CAT.NO: QC1929
Available for delivery