BNC to Cat5e/6 UTP AHD Video Balun Kit
- CAT.NO: QC3667
Deliver to
Store
Extend the transmission distance of your CCTV cabling without the need for a video amplifier. The balun accepts all composite video signals such as AHD, TVI and CVI. To use the baluns, strip away your UTP Cat5 cable at the ends and use a stranded pair connecting one wire to the positive terminal and the other to the negative terminal. Note the colour of the wires used and repeat the process at the other end. This kit includes two baluns; one to act as the transmitter and the other the receiver. It is suitable for CCTV setups, multimedia presentations and video conferencing.
Features:
 • No Power Required
 • Push Pin Terminal Connection
 • TVS Surge Protection
 • 60dB Crosstalk & Noise Immunity
 • Camera Support: AHD, TVI, CVI, Analogue
Input Connection
BNC
Connecting Cable
Cat5 UTP,Cat5e UTP,Cat6 UTP
Number of Outputs
1.0 pc
Output Connection
BNC
Signal Type
Composite Video (CVBS)
Number of Cables
1.0 pc
Maximum Distance Between Baluns (cat5e)
400.0 m
Length
38.0 mm
Width
12.0 mm
Height
19.0 mm
Packaged Dimensions
11.5cm(Length) x 10.7cm(Width) x 2.5cm(Height)
Discover more
BNC/RCA/Power to Cat5e/6 AHD Video Balun Kit
CAT.NO: QC3669
Available for delivery
PoE Passive Adaptor Kit
CAT.NO: YN8410
Available for delivery
Gigabit PoE Injector
CAT.NO: YN8040
Available for delivery
5-Port 10/100 PoE Network Switch
CAT.NO: YN8074
Available for delivery
10 Port Gigabit PoE Network Switch
CAT.NO: YN8049
Available for delivery