ANYCUBIC Mono UV Photon Resin 3D Printer

CAT.NO:TL4422

ANYCUBIC Mono UV Photon Resin 3D Printer

CAT.NO: TL4422

Create highly detailed 3D prints with this Photon Mono resin printer by Anycubic.
• Fast Printing Speed
• High Quality Z-axis
• ANYCUBIC Mono UV Photon

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

Please enter a valid email

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

Please enter a valid email

or Cancel

Unsubscribe from this on special notification

Please enter a valid email

or Cancel

Ordering a Gift for Christmas?

We recommend ordering your Christmas gifts by the below dates and as early as possible. We'll deliver items sent after these dates as quickly as we can, but they may not arrive in time for Christmas.

NOTE: Daily order cut-off times are 2:30pm NZDT.

Area
NZ Post

North Island
20th December

South Island
17th December

COVID19 - Shipping Delays

Due to increased volumes and logistics interruptions, your order may be delayed. We appreciate your patience and understanding whilst we do our best to deliver your orders as fast as possible.

Spend $99 Online & You'll Get Free Shipping

This offer is subject to the following terms and conditions:
• The offer is for online orders only.

• Applies to Standard Shipping only.

• This may exclude:

• Indent and backordered lines

• High demand low stocked items

• Specialty or promotional items

• Spare parts

• Gift cards

• Offer may exclude bulky or dangerous goods, like:

• Fridges

• Generators

• 3D Printers

• The terms of this service may change at any time.

• This offer excludes Click & Collect only items.

Shipment & Delivery Information

Your order can be delivered to anywhere throughout mainland New Zealand.

Delivery Charges

Under $99
$10

$99 to $499
$14

Over $500
$20

* Freight delivery times stated are for average volume items with total order weight under 5kg. Additional delivery time may result for some deliveries. Contact the Techstore should you require more details.
Delivery Addresses
Goods cannot be delivered to a post office box via an express courier service. If shipping to a PO Box you must select standard delivery during checkout.
Company policy is that we do not under any circumstances issue instructions to our couriers to leave deliveries unattended when no one is at the delivery location.
Heavy Goods
For unusually large or bulky orders our customer service staff may contact you if any additional freight costs are needed.
Transit Goods Insurance
If you wish to insure, it will cost $1 for every $100 value or PART THEREOF. In other words if your order is for $145.00 the insurance will be $2.00. This insurance covers goods DAMAGED in transit. We do not automatically insure unless you specify it during the checkout. If you don't select insurance you are NOT insured.
Parcel Lockers
We deliver to parcel lockers around New Zealand.
Dangerous Goods
Dangerous goods in reference to shipping are items or substances that when transported are a risk to health, safety, property or the environment. These include and are not limited to: explosives, radioactive materials, flammable liquids, dangerous or volatile chemicals, strong acids, compressed gases, poisons and aerosols. Items that can contain these materials include battery banks, aerosols, some tools and lithium batteries. Items marked with the Dangerous Goods icon below may be subject to shipping/delivery restrictions.
Airfreight Not Available

Click & Collect Also Available

Need your order even sooner? Order online and collect in-store in 1 hour. Learn more here.

$589.00

Bulk Pricing:

1-2	$589.00
3-5	$589.00
6+	$589.00

In Stock

Description

Create highly detailed 3D prints with this Photon Mono resin printer by Anycubic. Unlike filament (FDM) type 3D printers, this resin printer uses UV light that passes through its high resolution LCD screen to cure the resin layer by layer where it is needed. This method produces a much more detailed and smooth print with less visible print layers. The Photon Mono features a 6" monochrome 2K LCD for detailed prints up to 130mm long by 80mm wide. The two high quality Z-axis rails provide build heights up to 165mm high with layer resolutions between 0.01 and 0.15mm.

Thanks to the monochrome LCD, exposure times are reduced to just 1.5 seconds per layer so you can achieve print speeds up to 55mm per hour. The monochrome screen also provides up to 2000 hours of print time, which is four times longer than colour LCDs. To operate the printer, simply use the Anycubic slicer software to prepare and save the model to the supplied USB thumb drive, which you insert into the USB port on the printer. Use the 2.8" touchscreen to operate and monitor your printer's progress. The Anycubic slicer software supports up to 16 times anti-aliasing, with fast slicing, hallowing, split model, and text paste features. Other features include quick FEP replacement, UV-blocking top cover, matrix parallel light for uniform exposure, and top cover detection that stops the printing if the cover is removed.

Resin in multiple colours is sold separately.

Features:
• 6” 2K Monochrome LCD
• Quick FEP Replacement
• Fast Printing Speed
• High Quality Z-axis

Specifications:
• System: ANYCUBIC Photon Mono
• Operation: 2.8 inch Touch Screen
• Software: ANYCUBIC Photon workshop
• Connectivity: USB
• Technology: LCD-based SLA
• Light-source: High-quality filament (wavelength 405nm)
• XY Res.: 0.051mm 2560 x 1620 (2K)
• Z Axis Res.: 0.01mm
• Printing Speed: MAX 50mm/h
• Material: 405nm UV Resin
• Build Volume: 130mm(L) x 80mm(W) x 165mm(H)

Manufacturer Part Number : TBA_TL4422

Specifications

3d Printers and Filament

Filament Type	Resin
PC interface	USB
Maximum print size	130mm(L) x 80mm(W) x 165mm(H)
Maximum printing speed	50 mm/H
LCD Screen
Z Axis Position Accuracy	0.01mm
Layer Thickness	0.01mm-0.15mm

Internal or Sub-part Dimensions

Dimension details	Maximum Build Dimensions
Length	130mm
Width	80mm
Height	165mm

Power Rating

Continuous Power

45W

Product Dimensions

Weight	4.5kg
Dimension details	3D Printer Dimensions
Length	227mm
Height	383mm
Width	222mm

Downloads

1-2	$299.00
3-5	$269.00
6+	$239.00

1-2	$349.00
3-5	$309.00
6+	$309.00

1-2	$1,799.00
3-5	$1,799.00
6+	$1,799.00

1-2	$1,499.00
3-5	$1,499.00
6+	$1,499.00