60A MPPT Solar Charge Controller for Lithium or SLA Batteries
- CAT.NO: MP3749
1/3
$649.00
Bulk Pricing
Qty 1 - 1
$649.00 / Unit
Qty 2 - 3
$579.00 / Unit
Qty 4 +
$519.00 / Unit
Deliver to
Add postcode for delivery availability
Store
Choose a store for stock availability
60A MPPT Solar Charge Controller for Lithium or SLA Batteries
$649.00
What a feature packed Solar Controller! Using Maximum Power Point Tracking (MPPT) for maximum efficiency and charge rate, able to charge lead acid (sealed, gel or flooded) or lithium battery banks between 8V to 32V, and supporting 12V solar arrays up to 1125W or 24VDC arrays up to 2250W, it suits a huge range of applications. It features bulk, constant and float charge stages for rapid, efficient and safe battery charging, with feedback on charge status, current, voltages, etc. shown on the LCD screen. Built into a durable case for permanent installation with heavy duty screw terminals for cabling up to 2AWG.
Â
Note: Maximum Charge output is limited to 60A if the Solar Panel input is greater than 750W on 12V systems or 1500W on 24V systems.Â
Â
Features:
- Advanced MPPT control technology
- High tracking and conversion efficiency
- Supports Sealed, Gel or flooded lead acid and Lithium batteries
- 3-stage intelligent charging
- Multiple load work modes
- Extensive electronic protection
- Backlit LCD display
- RS485 communication
- Common negative grounding
Â
Â
Specifications:
Â
Compatible Battery Bank Voltages 12 / 24VDC SelectableÂ
Solar Input Voltage: 16 - 100VDC
Maximum Solar Array Size: 1125W/12VDC , 2250W / 24VDCÂ
Maximum Charge Output: 60AÂ
Maximum Load Current: 60AÂ
Dimensions: 340(H) x 232(W) x 105(D)mm, 3.5kg
Maximum Load Current: 60AÂ
Dimensions: 340(H) x 232(W) x 105(D)mm, 3.5kg
Â
Â
Battery support:
Â
- Sealed, gel or flooded Lead-acid (8~17V/12V; 18~32V/24V)
- LiFePO4 (12V/24V)
- LiNiCoMnO2 (12V/24V)
- LiFePO4 (12V/24V)
- LiNiCoMnO2 (12V/24V)
Note: The controller can only set the lead-acid battery type. The lithium battery type needs to be set through the PC software or APP. To configure via PC, a MP3747 RS485 to USB PC Connection Lead is required. To configure via the app, either a MP3746 RS485 to Wi-Fi Connection Module or MP3770 Wifi Adaptor for Powertech Solar Controllers is required.  Â
Solar Charge Controllers and Regulators
Max Solar Panel Array
750.0W,1500.0W
Charge Controller Technology
Maximum Power Point Tracking (MPPT)
DC Voltage Rating
DC Voltage
16.0V,100.0V
Product Dimensions
Width
155.0 mm
Height
221.0 mm
Depth
52.0 mm
Weight
940.0 g
Packaged Dimensions
Packaged Dimensions
44.8cm(Length) x 30.6cm(Width) x 18.1cm(Height)
Discover more
$269.00
Available for delivery
Purchased Together
12.8V 100Ah Lithium Deep Cycle Battery
CAT.NO: SB2215
$1,099.00
Available for delivery
$69.90
Available for delivery
Solar Regulator RS485 to USB PC Connection Lead
CAT.NO: MP3747
$23.90
Available for delivery
Remote Status Display with cable for Solar Regulator
CAT.NO: MP3748
$95.90
Available for delivery
12V 100Ah Deep Cycle Gel Battery
CAT.NO: SB1695
$589.00
Available for delivery