A replacement nozzle to Suit your Finder (TL4220), Finder Lite (TL4222), Inventor (TL4230) or Guider II (TL4240). Regularly replace your 3D printer nozzle to maintain the quality of your 3D prints and reduce the chances of any jams or clogging.

A replacement value bundle to suit your Creality CR-X TL4410 or CR-X Pro TL4411 3D printer. Comprises all of the components you'll need most in one bag! Limit switches, guide rollers, timing belt, 0.4mm nozzle, thermistor, and heating tube.

A replacement pipe joiner to Suit your Flashforge Adventurer 3 3D printer (TL4258). This pneumatic connector attaches the PTFE tube to the hotend, allowing seamless filament transport through the Bowden delivery system.

A replacement adhesive print bed surface layer to Suit your Adventurer 3 3D printer (TL4256). Replace the build tape whenever it becomes worn or damaged to maintain the quality of your prints and reduce the chance of issues caused by improper adhesion.

A replacement adhesive print bed layer for your Flashforge Guider II (TL4240) or Guider IIS (TL4239) 3D printer. It is recommended to replace the build tape whenever it becomes worn or damaged to reduce the chances of issues caused by improper adhesion.

A replacement PTFE filament feed (Bowden drive) guide tube to Suit your Adventurer 3 3D printer (TL4256).

A replacement thermocouple to Suit your Flashforge Finder (TL4220) or Finder Lite (TL4222) 3D printer. This is the component that gives your machine a temperature reading from the nozzle.

Creality Official High-Speed 0.4mm Brass Nozzle to suit the Ender-3 V3 SE and Ender-5 S1.

A replacement Teflon PTFE tube to Suit your Finder (TL4220) or Finder Lite (TL4222) 3D printer. PTFE tubes fit inside the barrel of the extruder to create a smooth, frictionless path for the filament, and are able to withstand high temperatures.

A replacement carboloy silicon build plate to Suit your Creality CR-X (TL4410) or CR-X Pro (TL4411) 3D printer. This bed platform is coated in a protective film, which is anti-scratch and dustproof.

A replacement adhesive print bed surface layer to Suit your Finder (TL4220) or Finder Lite (TL4222) 3D printer. It is recommended to replace the build tape whenever it becomes worn or damaged to reduce the chances of issues caused by improper adhesion.

A replacement extruder cable to Suit your Flashforge Guider II (TL4240) or Guider IIS (TL4239) 3D printer. This is the wire that makes the connection between the extruder board and main board.

A replacement air duct cooler cover to Suit your Flashforge Guider II 3d printer (TL4240).

A replacement extruder (direct drive) stepper motor to Suit your Flashforge Guider II (TL4240) or Guider IIS (TL4239) 3D printer.

A replacement extruder assembly to Suit your Flashforge Inventor 3D printer (TL4230). This kit includes nozzles, aluminium blocks, thermocouples, heatsinks, heater cartridges, threaded pipes and Teflon PTFE tubes.

When safety is paramount and looks are a close second this enclosure for your Snapmaker 2.0 is a must-have. Protect yourself, your project, and your workshop aesthetic with this add-on kit.

Creality Official replacement High-Flow Heating Head Kit to suit the K1 and K1 Max 3D Printers.

A replacement heating extruder assembly to Suit your Flashforge Guider II Extra Large 3D Printer (TL4240). This kit includes nozzle, aluminium block, thermocouple, heatsink, heater cartridge, threaded pipe and Teflon tube.

A replacement filament guide tube to Suit your Flashforge Guider II (TL4240) or Guider IIS (TL4239) 3D printer.

A replacement adhesive print bed surface layer to Suit your Flashforge Inventor 3D printer (TL4230). It is recommended to replace the build tape whenever it becomes worn or damaged to reduce the chances of issues caused by improper adhesion.