text.skipToContent text.skipToNavigation
220nF 50VDC Monolithic Capacitor 220nF 50VDC Monolithic Capacitor RC5494 0.48 In stock

220nF 50VDC Monolithic Capacitor

CAT.NO:RC5494

220nF 50VDC Monolithic Capacitor

CAT.NO:RC5494

Voltage - 50VW, Lead spacing 5mm Value Pkt
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

Notify me when on special
	
$0.48
Bulk Pricing:
1-24 $0.48
25-99 $0.33
100+ $0.28
In Stock



Description
A monolithic ceramic capacitor consists of thin dielectric layers interleaved with staggered metal-film electrodes; after leads are connected to alternate projecting ends of the electrodes, the assembly is compressed and sintered to form a solid monolithic block. Monolithic capacitors are generally used as their compact dimensions are desired for high density applications with limited space.

Handy Tip Capactitor Types

Ceramic:
These offer low cost and high capacitance in a small physical size. Normally there are two types, the ‘High Stability Temperature Compensating’ type and the ‘Bypass and Coupling’ type. The former for use in resonant circuit and filter applications, with a value largely independent of voltage and frequency. The latter is for use in less critical applications, as they are less stable and have non-linear temperature characteristics and are somewhat voltage dependent.Polyester:
These type offer good stability, a large range of values at low cost, and are the most widely used capacitor for general purpose.Polycarbonate:
These have a low temperature coefficient, low dielectric loss at high frequency and excellent temperature stability characteristics.Polystyrene:
These offer tight tolerance and are highly stable; making them suitable for very stable tuned circuits and oscillators.Polypropylene:
This type has a very low dielectric loss and are particularly suitable in audio circuits and sample-and-hold circuits.Mylar:
This is the Du Pont tradename for polyester. They usually have an aluminium film deposit on the dielectric and are called metallised polyester.

Specifications
Capacitor

Capacitor type Monolithic
Polarised Capacitor
Capacitance Rating

Item capacitance 0.22µF
DC Voltage Rating

DC Voltage 50V
Passive Component

Component Type Ceramic Capacitor
Pack Quantity 1pc
Pitch 5mm
Passive mount type Through Hole
Passive connector type Solder Legs
Component package Epoxy Dip
Passive number of legs 2 count
Passive marking code Number code
Articles


DELIVERY

✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-3 days for most areas in the North Island and 3-5 for the South Island

CHECK IN-STORE