Velleman Hand-held 1MHz Function Generator
- CAT.NO: QT2304
1/4
Discontinued
$23.76$359.00
Save $335.24
Store
Choose a store for stock availability
Velleman Hand-held 1MHz Function Generator
$23.76
Finally, a signal generator with the features of a bench top generator and a portable size! The Velleman HPG1 pocket signal generator will produce accurate test signals at frequencies from 1Hz all the way to 1MHz yet it is only a little bigger than a smartphone.
Easy to use, the pushbutton controls allow you to quickly set up generation of sine, square, and triangle waveforms with adjustable frequency and amplitude. The backlit LCD screen shows the current waveform and frequency settings. Frequency changes are in variable steps from 1Hz to 10kHz allowing you to change settings at your preferred speed. For more advanced testing it also has a frequency sweep mode to shift between two frequencies using a linear or logarithmic scale over an adjustable period. Signal amplitude is indicated by a handy slider bar with the output level also displayed in dBm and Vrms or Vpp (depending on waveform). An inbuilt Ni-MH battery gives up to 6 hours of run time and can be recharged with the included USB charge cable or a 9VDC plug pack (not included use Cat. MP-3146). Supplied with USB charge cable, BNC to RCA adaptor, and BNC to binding post adaptor.
Specifications:
• Digital to analogue converter resolution: 10 bits
• Frequency range: 1Hz to 1MHz
• Frequency steps: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
• Waveforms: Sine, square and triangle
• Maximum output voltage: 8Vpp
• Sweep modes: Linear or logarithmic, single or bidirectional
• Sweep period: 0.01Hz to 100Hz
• Dimensions: 114(H) x 74(W) x 29(D)mm
• Display size: 50(W) x 25(H)mm
• Display resolution: 128(W) x 64(H) pixels
• Weight: 200g
• Battery: Inbuilt 4.8V Ni-MH rechargeable
• Battery life: Up to 6hours
• Recharge: 9VDC 200mA from included USB charge cable or plug pack (sold separately use Cat. MP-3146)
Easy to use, the pushbutton controls allow you to quickly set up generation of sine, square, and triangle waveforms with adjustable frequency and amplitude. The backlit LCD screen shows the current waveform and frequency settings. Frequency changes are in variable steps from 1Hz to 10kHz allowing you to change settings at your preferred speed. For more advanced testing it also has a frequency sweep mode to shift between two frequencies using a linear or logarithmic scale over an adjustable period. Signal amplitude is indicated by a handy slider bar with the output level also displayed in dBm and Vrms or Vpp (depending on waveform). An inbuilt Ni-MH battery gives up to 6 hours of run time and can be recharged with the included USB charge cable or a 9VDC plug pack (not included use Cat. MP-3146). Supplied with USB charge cable, BNC to RCA adaptor, and BNC to binding post adaptor.
Specifications:
• Digital to analogue converter resolution: 10 bits
• Frequency range: 1Hz to 1MHz
• Frequency steps: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
• Waveforms: Sine, square and triangle
• Maximum output voltage: 8Vpp
• Sweep modes: Linear or logarithmic, single or bidirectional
• Sweep period: 0.01Hz to 100Hz
• Dimensions: 114(H) x 74(W) x 29(D)mm
• Display size: 50(W) x 25(H)mm
• Display resolution: 128(W) x 64(H) pixels
• Weight: 200g
• Battery: Inbuilt 4.8V Ni-MH rechargeable
• Battery life: Up to 6hours
• Recharge: 9VDC 200mA from included USB charge cable or plug pack (sold separately use Cat. MP-3146)
Packaged Dimensions
Packaged Dimensions
18.3cm(Length) x 15.0cm(Width) x 4.7cm(Height)
Discover more
10MHz/4000 Count Hand-held Scope DMM
CAT.NO: QM1577
$58.80$699.00
Save $640.20
Not available for delivery
CRO Oscilloscope Probe Cable Set
CAT.NO: QC1902
$62.90
Available for delivery