text.skipToContent text.skipToNavigation
Studio 350 - High Power Amplifier Kit Back Catalogue Studio 350 - High Power Amplifier Kit Back Catalogue KC5372 139.00
  • Studio 350 - High Power Amplifier Kit Back Catalogue
ONLINE ONLY
Studio 350 - High Power Amplifier Kit Back Catalogue

Studio 350 - High Power Amplifier Kit Back Catalogue

CAT.NO: KC5372

Kit Back CataloguePlease note: This item is only available for purchase on our website. It is not available in stores.Ref: Silicon Chip Jan / Feb 2004...
	
$139.00
WAS $209.00 Save $70.00
Bulk Pricing:
1-4 $139.00
5+ $139.00
Out Of Stock


Have a question about placing your order?
Call our Techstore
on 0800 452 922

Description
Kit Back Catalogue

Please note: This item is only available for purchase on our website. It is not available in stores.

Ref: Silicon Chip Jan / Feb 2004. STUDIO QUALITY DISTORTION, STUDIO QUALITY NOISE, STUDIO QUALITY POWER! Introducing the Studio 350. This is not for the faint hearted. The Studio 350 power amplifier will deliver a whopping 350WRMS into 4 ohms, or 200WRMS into 4 ohms. It offers some real grunt without any compromise, using 8 (yes, EIGHT!) 250V 200W plastic power transistors - four MJL21193/4 complementary pairs to be precise. It is super quiet, with a signal to noise ratio of -125dB(A) at full 8 ohm power. Harmonic distortion is fantastic - just 0.002%, and frequency response is almost flat (less than -1dB) between 15Hz and 60kHz!. We have mentioned the power, but we forgot to give you the music power figures of 240W* into 8 ohms and 480W* into 4 ohms! An incredible amount of power, at an incredible quality. If you want a serious power amp, with some serious grunt, you can't go past the Studio 350. Kit supplied in short form with PCB and electronic components. Kit requires heatsink and +/- 70V power supply (a suitable supply is described in the instructions). * Power figures applicable when described power supply is used. Stu See in store for our great deal on power supply components for this kit.

Note: The following parts are not included with the purchase of this kit.

Items required to build power Supply:
• 1 x MT2146 50+50V 500VA Toroidal
• 2 x RM7165 470n 100V Capacitor
• 4 x RR2802 15k / 1W Resistors
• 6 x RU6710 8000U 80V Electrolytic Capacitors
• 1 x ZR1324 35A 400V Bridge RectifierM


Recommended fan cooled heatsink components:
• 2 x HH8532 254mm Fan Assisted Heatsink Half
• 1 x YX2510 240VAC 80mm Fan

Please note: This item is only available for purchase on our website. It is not available in stores.

Specifications
Packaged Dimensions
Packaged Volume 1.89L
1.89l
Packaged Weight 0.461kg
Packaged Length 21cm
Packaged Width 30cm
Packaged Height 3cm
Warranty: 3 Months