text.skipToContent text.skipToNavigation
Stepper Motor Interface Module for PCs Stepper Motor Interface Module for PCs AA0352 9.54

Stepper Motor Interface Module for PCs

CAT.NO: AA0352

	
$9.54
WAS $49.90 Save $40.36
Bulk Pricing:
1-4 $9.54
5-9 $9.54
10+ $9.54
Out Of Stock


Have a question about placing your order?
Call our Techstore
on 0800 452 922

Description
Control the speed and direction of a 4-pole stepper motor, rated between 5 to 18VDC @ 2 amps max, via your computer. Connected to the Parallel port of your PC and using the supplied software you can control the motor directly with the keyboard, or programmed for forward and backwards with an adjusted number of cycles. Requires a split rail DC power supply rated at motor specifications (between 5 and 18 volts) .
* Supplied with 3.5-inch disk.
* Dimensions: 120 x 50 x 23mm.
* Can be used with our stepper motors YM2752 & YM2753 (NOTE: These two products are now discontinued and cannot be purchased)
* Power handling: 1A nominal, 2A max

Specifications
Packaged Dimensions
Packaged Volume 0L
Packaged Weight 0kg
Packaged Length 0cm
Packaged Width 0cm
Packaged Height 0cm
Warranty: 3 Months
Downloads