12V 5-Stage Car & Motorbike Maintenance Charger (0.8A / 3.8A, IP65 rated)
Bulk Pricing
Qty 1 - 1
$20.09 / Unit
Qty 2 - 3
$20.09 / Unit
Qty 4 +
$20.09 / Unit
Deliver to
Store
Three different modes of operation make this charger suitable for all types of sealed lead acid (SLA) batteries - wet cell, gel cell, and AGM (absorbed glass mat) batteries ranging in capacity from 1.2Ah to 120Ah.
The micro-computer controlled circuitry will diagnose the battery's state of charge, provide the correct charging mode, eventually switching over to float/maintenance charge to keep the battery at full charge and eliminate battery sulphation. This charger can also recover slightly sulphated batteries as low as 7.5V, and will even charge batteries in sub-zero temperatures.
The interchangeable lead sets allows a charging lead to be permanently attached to your battery for quick connection/disconnection of the charger - a must have for motorbikes with hard to reach battery terminals or that classic car that spends most its life in the garage!
100% safe to leave connected to your vehicle's battery for months on end, with no damage to your vehicle or battery.
• Short circuit and reverse polarity protection
• Anti-spark protection
• Dust & splash proof (IP65 rated)
• Standby, fault, mode selection and charging LED indicators
• 1.8m mains input cable
• 1.8m charging cable, with interchangeable fly leads (ring terminals or alligator clips)
• Mounting feet for wall mounting
Specifications:
• 3 different charging modes:
• MODE 1: 14.4V / 0.8A, for motorbike batteries
• MODE 2: 14.4V / 3.8A, for car batteries
• MODE 3: 14.7V / 3.8A, for AGM batteries and sub-zero temperatures
• Dimensions: 175(L) x 60(D) x 45(H)mm
Approval Number: Q070702
Charger Output Voltage
12 V
Controller Type
PWM
Controller Type
Multi-Stage
Connection Type
Alligator Clips
Charger Output Current
3.8 A
Cell Type(s) Charged
SLA Block
AC Plugpack Voltage
240 V
Vehicle Connection
Alligator Clamps
Item Connection
Screw Terminals
Rated for AU Mains
true
Length
175 mm
Height
45 mm
Depth
60 mm
Packaged Volume
4.888 l
Packaged Weight
0.763 kg
Packaged Qty
1 pc
Packaged Type
Blister Pack - Single
Packaged Length
23.5 cm
Packaged Width
26 cm
Packaged Height
8 cm
Packaged Hangs
true
Package Stands
false
Package Stacks
false
Shipping Volume
4.422 l
Discover more
Available for delivery
12V 10A Intelligent Switchmode 5 Stage Battery Charger
CAT.NO: MB3625
Not Available for delivery
4-Stage 24V to 12V DC to DC Battery Charger, 40A
CAT.NO: MB3691
Not Available for delivery
CHGR BATT 12V 4-STAGE 15A 240V WALL MNT
CAT.NO: MB3710
Not Available for delivery
CHGR BATT 12V 4-STAGE 40A 240V WALL MNT
CAT.NO: MB3715
Not Available for delivery
Intelligent 6V/12V/24V 15A Battery Charger
CAT.NO: MB3623
Available for delivery
12/24V 15A 9 Step Switchmode Battery Charger
CAT.NO: MB3607
Available for delivery
12/24V Switchmode 7A Battery Charger
CAT.NO: MB3606
Not Available for delivery
3-Stage 6/12V Automatic Battery Charger
CAT.NO: MB3603
Not Available for delivery
12/24V 25A Switchmode Battery Charger
CAT.NO: MB3608
Not Available for delivery
Purchased Together
Heavy Duty 400A 3m Jumper Leads with LED Illumination
CAT.NO: WH6012
Available for delivery
Battery Box to Suit 100Ah SLA
CAT.NO: HB8102
Available for delivery
Adjustable Universal Battery Hold Down Clamp
CAT.NO: HC4039
Available for delivery
High Quality 120A Battery Isolation Switch
CAT.NO: SF2245
Available for delivery