Designed for efficiently charging 12 Volt SLA (Sealed Lead Acid) batteries using solar cells rated up to 100 Watts. It is easy to wire up, prevents battery discharge during low sunlight and indicates charging and full battery conditions using a yellow and green 3mm LED. 20 Amp fuse and fuse holder recommended (sold separately). Technical data
Solar cell input voltage: 14 - 30 V/DC open circuit
Nominal voltage: 12 V/DC
Maximum input current: 10 Amps
Peak input current: 20 A (<5 minutes)
Cut in battery voltage: approximately <13.4 Volts
Cut off battery voltage: approximately >14.4 Volts
Displays: 1 LED for “Charging”, 1 LED for “Battery Full”
Passive power consumption: <2.5 mA (LED switched on)
