Measure temperature and relative humidity using a simple interface that requires just three wires to the sensor: GND, power, and data. Supported by an Arduino library that makes it very easy to read values into your project, so with a single I/O line from your microcontroller you can read both temperature and humidity. • -4°C to +125°C temperature range with +/-0.5°C accuracy • 0-100% relative humidity with 2-5% accuracy • 0.5Hz sample rate (one sample every 2 seconds) • 3 to 5V operation • Power consumption just 4.3mA during reads, even less when idle • Blue power LED • Dimensions: 31(W) x 23(H) x 4(D)mm Support Email: support@freetronics.com
