text.skipToContent text.skipToNavigation
Heavy Duty Current Shunt - 51 - 100A Heavy Duty Current Shunt - 51 - 100A QP5414 3.14

Heavy Duty Current Shunt - 51 - 100A

CAT.NO: QP5414

  • Heavy Duty Current Shunt - 51 - 100A
DISCONTINUED
Heavy Duty Current Shunt - 51 - 100A

Heavy Duty Current Shunt - 51 - 100A

CAT.NO: QP5414

Add to wishlist
	
$3.14
WAS $29.90 Save $26.76
Bulk Pricing:
1-4 $3.14
5-9 $3.14
10+ $3.14



Have a question about placing your order?
Call our Techstore
on 0800 452 922

Description
At long last we have found a supplier of quality hand-made accurate current shunts. They are designed to work across a Digital Panel Meter on their 0 - 200mV range, i.e. the most common type. When set on this range the DPM will read the voltage drop across the shunt directly in amps. Strictly speaking, the 50A shunt will read under 5A of course. The problem is, however, that the voltage drop across the shunt may be so low for low current levels that the meter may have difficulty reading this voltage accurately.

Current 51 - 100A

Shunt res. 1.0mΩ

V. drop Max Current 100mV

Accuracy 0.5%

The shunts are quite ruggedly made, however and will happily withstand up to 20% overload. To set up the DPM simply wire the appropriate decimal point to the meter board and connect the 0 - 200µV straight across the shunt inner screw terminals. At 50mV (for 5A) the meter should read 5.00A. The ‘A' annunciator must be wired up as well.

MANUFACTURERS: WE HAVE A SHUNT SUPPLIER WHO IS IMPOSSIBLE TO BEAT FOR PRICES AND QUALITY. WE CAN SUPPLY CUSTOM SHUNTS IN QUANTITIES AS LITTLE AS 100 PIECES. CONTACT OUR WHOLESALE SUPPLIER ELECTUS FOR DETAILS.

Specifications
Warranty: 3 Months