text.skipToContent text.skipToNavigation
Flashforge Flashforge Creator III V2 Dual Extruder 3D Printer Flashforge Creator III V2 Dual Extruder 3D Printer TL4258

Flashforge Creator III V2 Dual Extruder 3D Printer

CAT.NO:TL4258

  • Flashforge Creator III V2 Dual Extruder 3D Printer
  • Flashforge Creator III V2 Dual Extruder 3D Printer
MAKER HUB AND ONLINE ONLY
Flashforge Creator III V2 Dual Extruder 3D Printer

Flashforge Creator III V2 Dual Extruder 3D Printer

CAT.NO:TL4258

Flashforge Creator III V2 3D Printer
• Dual Independent Extruders
• Build Area 300mm (Length) x 250mm (Width) x 200mm (Hieght)
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

	
Out Of Stock



Description
X2 OUTPUT
With two extruders the Flashforge creator 3 V2 you can print multiple ways, independent dual extruder, Mirror Mode and Copy mode. Double efficiency of the mirror printing, the Creator 3 makes it come true where more complicated prints that can be printed with dual extrusion and water-soluble filament. Make the impossible possible and achieve the expected printing effect.
300 DEGREES CELSIUS
Integrated nozzle design supports 300 degree heating temperature. Wide range of materials allow the printing for what ever your needs are.
INTELLIGENT LEVELING
Totally automatic Z-axis calibration is done by simply click the screen and the device will run automatically and will record the height data of left and right extruder. The plate leveling is exceedingly simple because of the nozzle sensor and visualisation tips.
SPRING SHEET PLATE
The prints are easily remove from the build plate with the supplied spring sheet plate, simply remove the plate off the bed and slowly bend it and your print will pop off the plate.
BUILT-IN CAMERA
The built-in camera helps to keep an eye on prints in case of incorrect settings, and also helps to pause or abort printing via Wi-fi.
4.5INCH TOUCH SCREEN
Adjustable LED lights ensure an optimised 3D printing experience in any enviroment and just one of the controls you can change via the built in touch screen.
BUILT-IN FILAMENT SPOOLS
With 2 1KG built-in filament spool holders, the Creator 3 V2 does not only print amazingly but also looks clean with no external mounted filament holders.

Specifications
3d Printers and Filament

Filament Type ABS,PLA
Filament Size 1.75mm
Maximum print size 300(L) x 250(W) x 200(H)mm
Operating System Compatibility

Compatible with current versions of Microsoft Windows
Compatible with current versions of Apple macOS
Compatible with current versions of Linux
Product Dimensions

Length 1917.7mm
Width 1605.28mm
Height 1935.48mm
Weight 23.6kg
Downloads
Articles


DELIVERY

✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-3 days for most areas in the North Island and 3-5 for the South Island

CHECK IN-STORE