eSUN Green PLA+ Filament 1kg 1.75mm
- CAT.NO: TL4462
- MPN: PLA+P175G1
Bulk Pricing
Available variants (10)
Deliver to
Store
Buy 3 and receive 10% Off 1kg Esun Filaments
Special offer valid until 29/09
The all new eSUN PLA+ filaments are suitable to use on your FDM (Fused Deposition Modeling) 3D printer with little to no change to your regular PLA settings.
PLA+ (modified PolyLactic Acid) is extracted and purified from corn grain for an environmentally friendly composition. It is low odour and users report a slight, sweet aroma while printing.
Features
- Good balance of strength, rigidity and toughness for strong impact resistance.
- 100% bio-degradable and FDA food safety approved.
- Ready to print on any open source desktop or industrial printer.
- Low shrinkage rate means a uniform diameter so you won't get any cracking or issues being brittle.
- Up to ten times stronger than standard PLA.
- Delivers exceptional performance consistently.
- The easiest to work with and most importantly USER FRIENDLY!
Printer Settings
- Best Printing Temperature:200-220℃.
- Bed Temperature:0-70℃.
- Printing Speed:30~90mm/s.
- Movement Speed :90~150mm/s.
Filament/Resin Type
PLA
Filament/Resin Colour
Green
Filament Size
1.75 mm
Weight
1.0 kg
Packaged Dimensions
21.4cm(Length) x 21.8cm(Width) x 7.6cm(Height)
Discover more
eSUN Black PLA+ Filament 1kg 1.75mm
CAT.NO: TL4454
Available for delivery
eSUN Pink PLA+ Filament 1kg 1.75mm
CAT.NO: TL4456
Available for delivery
eSUN Purple PLA+ Filament 1kg 1.75mm
CAT.NO: TL4457
Available for delivery
1.75mm Black eSUN PETG Filament 1kg Roll
CAT.NO: TL4465
Available for delivery
1.75mm Fire Engine Red eSUN PLA+ Filament 1kg Roll
CAT.NO: TL4458
Available for delivery
1.75mm Copper eSUN ePLA-Silk Filament 1kg Roll
CAT.NO: TL4479
Available for delivery
eSUN Red ABS+ Filament 1kg 1.75mm
CAT.NO: TL4474
Available for delivery
eSUN White PLA+ Filament 1kg 1.75mm
CAT.NO: TL4455
Available for delivery
Purchased Together
Creality Ender-3 V3 SE
CAT.NO: TL4751
Available for delivery
Creality Ender-3 V3 KE Filament Printer
CAT.NO: TL4753
Available for delivery
Creality K1 Max
CAT.NO: TL4762
Available for delivery
eSUN eBox Lite
CAT.NO: TL4430
Available for delivery
Available for delivery
Protech Spare Vacuum Bags for 3D Filament - Pack of 6
CAT.NO: TL4392
Available for delivery