This tiny module charges one lithium cell from a 5V supply. Ideally paired with XC4512 DC-to-DC Converter Module to create a project that runs on a single lithium cell and recharges by USB.

With a more efficient regulator than that built into the Arduino UNO development boards, use this module to run your 5V Duinotech projects from a 6V, 9V or even 12V supply.

Detect current consumption on the motors of your next robot and useful for a range of power monitoring projects, this module outputs a voltage proportional to current passing through the sense pins on the module.

Receiving power from a USB Type-A socket or round 2.1mm DC socket, this module adds a compact 3.3V or 5V power supply to your breadboard for an easy project prototyping stage.

Bridging Logic Levels, Empowering Connections.

When connected to an Arduino, this impressive MOS driver module accepts Pulse Width Modulated (PWM) input to drive 24VDC loads.

The Arduino compatible boost module can be used to provide higher voltages for your project, such as running 5V Arduino projects from Lithium batteries.
• Output from 5V-35V

This module is capable of providing a stable 5V from battery power. Input is via two solder pads, output is via a female USB socket. Great for making your project reliable and portable when it comes to power supply.

Allows simple and tidy connection between all Linker sensors or modules and Arduino.

Power up to 4 EtherTen’s or EtherMega’s with DC from a low cost plugpack across your home or office network cables. This takes all the har...