text.skipToContent text.skipToNavigation
Powertech 300W 12VDC to 230VAC Pure Sine Wave Inverter - Electrically Isolated 300W 12VDC to 230VAC Pure Sine Wave Inverter - Electrically Isolated MI5732 119.00

300W 12VDC to 230VAC Pure Sine Wave Inverter - Electrically Isolated


300W 12VDC to 230VAC Pure Sine Wave Inverter - Electrically Isolated


A pure sine wave inverter suitable for mobile or permanent power installations.
• Suitable for Microwave, Power Tools or TV
• Includes USB Port
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Notify me when in stock

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

Notify me when on special
Bulk Pricing:
1-2 $119.00
3-5 $106.90
6+ $106.90

This convenient mains pure sine wave inverter is perfect when you’re looking at powering your sensitive appliances, and where a standard mains socket isn’t available. It provides you with a mains outlet for small appliances such as laptops, stereos, some computers, phone chargers, and other low-power mains applications. It boasts all the safety features you need like overload and input reverse polarity protection, and connects directly to a battery with the supplied aligator clip cable. 300W is plenty of power for many small-medium devices while 600W surge power provides support for essential startup loads.

• Quick Charge USB Port
• Includes Battery Lead with Alligator Clips
• Modern Design, Portable and Easy Operation
• Surge Power: 600W Surge
• Low Battery Alarm: 10.5±0.5V
• Low Battery Shutdown: 10.0±0.5V
• High Battery Shutdown: 15.5±1.0V

Handy Tip Application Suitability - Inverters

We DO NOT recommend that you use these products to operate the following: FRIDGES, AIR COMPRESSORS, AIR CONDITIONERS An inverter is a device which converts 12 or 24VDC into 240VAC. The240VAC generated is as lethal as the power in homes, and should be treated with the same respect. Inverters can be easily damaged, and connecting the input voltage terminals the wrong way around on the battery can damage the unit - be careful!!
• Appliances most suitable for connection include: Most power tools, lights, most TVs, video recorders / players, most computers, fax machines and most audio equipment.
• Fluorescent lights can give a highly inductive load on start up which can damage inverters. Appliances NOT suitable include:
Electric blankets, toasters, hair dryers, irons, radiators and heavy power tools (large angle grinders, circular saws etc.)Inverters will generally drive inductive loads such as electric motors, but only if the startup current is not high. Generally high startup current situations are when the motor is permanently coupled to a load such as a refrigeration or airconditioner compressor (Imagine the compressor at rest just before top dead centre you can easily realise the start up load on the motor!). Many other motors such asin drills, small angle grinders, buffers etc. start up under virtually no load and this is usually OK for the inverter provided the tool is within the inverter rating.

It needs to be pointed out that one of the major differences between a domestic power point and inverter is that the source impedance of a power point is very low compared to the inverter. This is why inverters have trouble with appliances with high start up currents and a domestic power point does not. Another thing that must be remembered is the special case of fluorescent lights with ballast chokes in them (by far the most common type).

Manufacturers of fluoro lights assume that they are just going to be installed to a normal 240V 50Hz sine wave supply. They are required to supply a product that does not overly distort the mains waveform. They generally comply with this by installing a, say,3.3F non polarised capacitor ac cross the mains/neutral supply inside the housing of the lamp fitting. This is called a power factor correction capacitor. This seems to work OK for a sine wave supply from a low source impedance.

When you drive such a device with modified sine wave 240Vpower, different things start to happen. The power factor correction capacitor presents a much greater load to a modified sine wave signal (which is a complex collection of high and low frequencies)than it would if it was a sine wave.

The bottom line is to reduce this capacitor to about 0.47?F or take it out completely. Inverters are generally OK then. It is also possible for an inverter to be damaged by the surges in current generated when using standard flourescent starters. This can be prevented by replacing the starter with an electronic starter.


Output Wave Pure sinewave
Low Battery Shutdown 10V
High Battery Shutdown 15.5V
Output Frequency 50Hz
External Casing bolt down
Includes USB Charge Port
Power Conversion and Transformation

Type of converter or transformer inverter
AC Voltage Rating

AC Voltage rating 230V
AC Frequency 50Hz
Vehicle or Vessel Powered

Required Voltage 11V-15V
Lead Included
AC Current Rating

AC current rating 1.3A
Product Dimensions

Width 220mm
Height 70mm
Weight 790g
Depth 100mm


✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-3 days for most areas in the North Island and 3-5 for the South Island