text.skipToContent text.skipToNavigation
240V 10A Motor Speed Controller Kit with Soft Start 240V 10A Motor Speed Controller Kit with Soft Start KC5526 189.00 In stock

240V 10A Motor Speed Controller Kit with Soft Start

CAT.NO: KC5526

240V 10A Motor Speed Controller Kit with Soft Start

CAT.NO: KC5526

Refer: Silicon Chip Magazine Feb/Mar 2014 A significant improvement on our successful KC-5478 10A Motor Controller Kit. Designed for controlling the sp...
Add to wishlist

15% Off Orders Over $60
Nerd Perks Only
Valid until 23/09/18
Gift cards and certain brands excluded

	
$189.00
Bulk Pricing:
1-4 $189.00
5+ $169.90
In Stock



Have a question ?
Call our Techstore
on 0800 452 922
Description

Refer: Silicon Chip Magazine February/March, 2014.
A significant improvement on our successful KC-5478 10A Motor Controller Kit. Designed for controlling the speed of power tools such as electric drills, lawn edgers, circular saws, routers or any other appliance with a universal (brush-type) motor, rated up to 10A. The new design is easier to build, has a smoother control, more "grunt" at low speed, features soft start to avoid dangerous kick-back, and improved overload protection. The case has the tricky cut-outs pre-machined, but a little bit of  fine tuning may be required to complete the project. Kit includes screen printed machined case, double-sided PCB, GPO, programmed micro and electronic components.

Features:

- Extremely smooth and precise motor speed control
- Speed can be controlled from zero to maximum
- Superb speed regulation under load
- Adjustable speed regulation with feedback control
- Excellent low-speed motor operation
- 2300W (10A) rating
- Cycle-by-cycle current overload protection
- Over-current limiting
- Soft starting
- NTC Thermistor for initial surge current limiting
- Fused protection
- Rugged case with interference suppression included
- For 230VAC brush (universal) motors
- Speed adjustment: Zero to motor’s maximum
- PWM frequency: 980Hz
- Cycle-by-cycle current limiting: 23A peak
- Average current limiting: 15A
- Soft start rate: Up to 2.54s from zero to full speed
- NTC thermistor: 10-ohm at 20°C, <0.1-ohm@10A

Note: Not suitable for inducted or shaded-pole motors


Assembly required
Specifications
AC Power Supply or Controller Kit

Output terminals 3 Pin AU/NZ Mains Plug / Socket
Output voltage selection Potentiometer
Kit

Kit Form Full Form (circuit and enclosure)
Kit Group General Projects
Difficulty Complex
Recommended Minimum Age 18Yr
Instructions Included
Estimated Construction Time 4hr
Tools required Soldering Iron,Long Nose Pliers,Flat Head Screwdriver
Application Field Motor Speed Controller
Contains High Voltage Components
AC Voltage Rating

AC Voltage rating 240V
AC Current Rating

AC current rating 10A