text.skipToContent text.skipToNavigation

Members Only - 15% off sitewide when you spend $50+
Simply sign in before checking out for discount to be applied. Exclusions apply, see T&Cs. Not a member? Sign up today.

Powertech 12V 8A 8-Step Automatic Marine Battery Charger with Dual Output 12V 8A 8-Step Automatic Marine Battery Charger with Dual Output MB3627 119.00

12V 8A 8-Step Automatic Marine Battery Charger with Dual Output

CAT.NO:MB3627

  • 12V 8A 8-Step Automatic Marine Battery Charger with Dual Output
  • 12V 8A 8-Step Automatic Marine Battery Charger with Dual Output
  • 12V 8A 8-Step Automatic Marine Battery Charger with Dual Output
CHECK STORE STOCK
12V 8A 8-Step Automatic Marine Battery Charger with Dual Output

12V 8A 8-Step Automatic Marine Battery Charger with Dual Output

CAT.NO:  MB3627

Compact in size and feature-packed with intelligent charging.
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

	
$119.00
Bulk Pricing:
1-1 $119.00
2-3 $106.90
4+ $94.90
OUT OF STOCK ONLINE Limited quantity available in store

Description
1 Year Warranty

Designed to charge and maintain 12V lead-acid batteries, including Wet, MF, VRLA, AGM and Gel, and Calcium batteries from 1.2Ah to 120Ah. Compact in size, but feature-packed with intelligent charging and dual channel output to charge two batteries simultaneously up to 4A each. The 8-step charging process includes Diagnosis, Recovery, Soft Start, Bulk, Absorption, Analysis, Float, and Maintenance for larger capacity batteries. The housing is dust and waterproof rated to IP68, making it suitable for outdoor and marine use. Safety features include short circuit, open circuit, reverse polarity, battery low, over temperature, spark, and safety time protection. Mains powered.

Features:
- Suits Wet, MF, VRLA, AGM, GEL, and Calcium
- Dual Channel
- IP68 dust and waterproof rated

Specifications:
Output: 2 x 12VDC, 4.0A
Output connectors: Large Alligator Battery Clips
Stand-By Power: <2W
Reverse Current: <5mA
Voltage Tolerance: ±0.2V
Current Tolerance: 
±10% for 4.0A
±10% for 2.5A
±15% for 0.9A
Normal Battery Voltage: 2.0-14.8V
Charge Control Type: CC/CV, Float Charging for Backup Power
Cable Length: 
Mains Power Plug to Unit: 2m
Unit to Battery Clamps: 1.8m

Handy Tip Multi State Charging Information

All-in-one chargers which have multiple charge settings to suitdifferent sized batteries and charging requirements. Capable of recharging the battery and maintaining the charge state indefinitely, they are particularly well suited to being continuously connected to a battery. Some models also have additional functions such as rapid boost charging and can also be used as a general purpose high current power supply. For further information see these types of possible charging states *may not be applicable to the unit you are viewing *
BATTERY TEST - Checks the battery to ensure it is ready for charging, polarity of leads etc.
DESULPHATION: Detects sulfated batteries. Pulsing current and voltage, removes sulfate from the lead plates of the battery restoring the battery.
SOFT START: Initial battery test to determine battery condition. Ift he battery is severely discharged, charger will begin the Soft Start stage. Charging starts with reduced current until battery voltage reaches a normal condition for charge.
BULK MODE: Major charging stage where the battery receives the majority of its charge. During this stage the battery is charged to up to 80% capacity.
ABSORPTION MODE: Completes the charge up to virtually 100% at a slower charge rate to protect the batteries working life.
RECONDITION MODE: Select “Recondition” mode, charges at higher voltage to recondition the sulfate of the battery to save battery life.
ANALYSIS: Tests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced.
FLOAT: Low constant voltage, minimal charge current, battery is fully charged.
PULSE MODE: Maintaining the battery at 95-100% capacity. The charger monitors the battery voltage and gives

Specifications
Mains powered

Mains Max Current
1.2A
Frequency
50Hz-60Hz
Mains Voltage Range
220V-240V
Rated for AU Mains
Product Dimensions

Height
50mm
Width
178mm
Weight
2kg
Depth
139mm
Warranty: 12 Months
Downloads
Articles
DELIVERY

✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-3 days for most areas in the North Island and 3-5 for the South Island
CHECK IN-STORE