text.skipToContent text.skipToNavigation

Members Only - 15% off sitewide when you spend $50+
Simply sign in before checking out for discount to be applied. Exclusions apply, see T&Cs. Not a member? Sign up today.

Powertech 12/24V 30A Flush Mount PWM Solar Charge Controller with LCD Display 12/24V 30A Flush Mount PWM Solar Charge Controller with LCD Display MP3764 149.00 In stock

12/24V 30A Flush Mount PWM Solar Charge Controller with LCD Display

CAT.NO:MP3764

12/24V 30A Flush Mount PWM Solar Charge Controller with LCD Display

CAT.NO:  MP3764

Keep an eye on your power system.
• Lead Acid and LiFePO4 Batteries
• RS485 Port
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

Notify me when on special
	
$149.00
Bulk Pricing:
1-1 $149.00
2-3 $133.90
4+ $118.90
In Stock

Description
2 Year Warranty

This flush mount solar charge controller enables you to keep an eye on your power system without having to stare at an unsightly controller cluttering your RV or boat’s interior. The intelligent system features a PWM charger with bulk, boost/equalise, and float modes to keep your Lead Acid or LiFeP04 batteries in peak condition. The integrated LCD indicates real-time energy information, operational parameters, and fault messages, and is easily navigated using the two push buttons. Installation is made easy with pluggable terminals on the rear for the solar panel, battery, and temperature sensor. An RS485 port enables you to connect a computer for programming purposes, or to a Wi-Fi module (sold separately) so you can control the system from your Smartphone. It has extensive electronic safety protection, and is sure to keep your appliances and gadgets running when you’re away from mains power.
Battery Support:
• Sealed, Gel or flooded Lead (8V - 30V)
• LiFePO4 (4S/12V, 8S/24V)
• Li(NiCoMn)O2 (3S/12V, 6S/24V)

Features:
- 8 - 32VDC Operating Range, 50VDC Maximum Open-Circuit Solar Voltage
- Compatible with Lead acid and LiFePO4 batteries
- Flush mount
- Bulk, Boost/Equalize, Float charging modes
- LCD screen with real-time energy stats, operational and fault message
- Battery temperature compensation
- Remote control; monitor and set parameters via PC or APP
- 10mm2/8AWG Recommended Cable Size (16mm2/6AWG Max)
Wi-Fi Connection Module (Sold Separately)
Add Wi-Fi communication to the MP3764 Solar Charge Controller with this interface and control your power installation with your Smartphone.
• Up to 50m communication range

Handy Tip Solar Charge Controllers

Directly connecting a solar panel or array to a battery can be catastrophic as solar panels can output a wide voltage range. As an example, a nominal 12 volt rated panel can output anything up to 22volts during an average sunny day. A solar charge controller between the panel and the battery ensures the battery receives the correct output voltage and current from the panel to minimise the risk of the battery being overcharged or discharging back into the panels. Charge controllers come in a variety of types which give different performance and can be matched to simple recreational applications all the way up to complex high power solar array installations.

SWITCHING: Simple switching controllers connect the panel to the battery when the panel is providing power & the battery is not fully charged. This type of controller is low cost and only good for basic solar equipment setups such as standby lighting, etc. where the panel yield is far higher than the load requires. PWM: Pulse width modulated (PWM) controllers continually apply voltage pulses to the battery whenever the panel is providing sufficient voltage. The pulse width (or duration) is varied by the controller depending on the charge state of the battery to ensure the correct amount of charge is harvested from the panel whenever it is available. As a result, PWMc ontrollers provide a much higher power yield than simple switching controllers.

MPPT: Maximum power point tracking (MPPT) controllers maximize power conversion between the panel output and the battery input by using a DC to DC switchmode power converter. By continuously tracking the panel output and adjusting the converter they yield the maximum amount of power under widely varying solar conditions. MPPT controllers give the best solar system efficiency and improve solar system power yield by a significant percentage. Both PWM and MPPT controllers are available with display panels which allow you to track performance of the solar system. Panel voltage, battery voltage, charging current, and total charge supplied can be easily displayed so you can ensure the system is running correctly. More complex models also include integration functions to remotely control other equipment or be linked into advanced systems.

Specifications
Internal or Sub-part Dimensions

Height
158mm, 106mm
Dimension details
Mounting Cutout
Width
96mm, 179mm
Additional Dimensions

Dimensions details
Mounting Screw Hole Size
Diameter
5mm
Solar Charge Controllers and Regulators

Max Charging Current
30A
Max PV Open Circuit Voltage
30V
Charge Controller Technology
Pulse Width Modulated (PWM)
DC Voltage Rating

DC Voltage
12V, 24V
DC Current Rating

DC current rating
30A
Ingress Protection Rating

IP Rating
IP30
Dust/Particle Ingress Protection
3 - Objects > 2.5mm, Tools, thick wires etc
Liquid/Moisture Ingress Protection
0 - Not protected
Product Dimensions

Height
158mm, 106mm
Width
96mm, 179mm
Depth
49mm
Weight
300g
Product Availability

Availability
Stocked item
Warranty: 24 Months
Downloads
Articles
DELIVERY

✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-3 days for most areas in the North Island and 3-5 for the South Island
CHECK IN-STORE