12/24V 20A Solar Charge Controller with USB

CAT.NO: MP3752

12/24V 20A Solar Charge Controller with USB

CAT.NO: MP3752

Pulse Width Modulation (PWM) to control battery charging.

15% Off Orders Over $60
Nerd Perks Only

Valid until 23/09/18
Gift cards and certain brands excluded

	
			
			
 
Shipment & Delivery Information
 
 Your order can be delivered throughout New Zealand. 
  
 Delivery Charges:
 
                            Under $80              $9          
                               $80+              Free          
     
 
  
 Freight delivery times stated are for average volume items with total order weight under 5kg. Additional delivery time may result for some deliveries. Contact the Techstore should you require more details.
 
 Delivery addresses
 • Goods cannot be delivered to a post office box
 • Company policy is that we do not under any circumstances issue instructions to our couriers to leave deliveries unattended when no one is at the delivery location
 Heavy Goods
 • For unusually large or bulky orders our customer service staff may contact you if any additional freight costs are needed.
 Transit Goods Insurance
 If you wish to insure, it will cost $1 for every $100 value or PART  THEREOF. In other words if your order is for $145.00 the insurance will  be $2.00. This insurance covers goods DAMAGED in transit. We do not  automatically insure unless you specify it during the checkout. If you  don't select insurance you are NOT insured.
  Parcel Lockers
  We deliver to parcel lockers around New Zealand.

$79.90

Bulk Pricing:

1-1	$79.90
2-3	$71.90
4+	$63.90

In Stock

Quantity

Have a question ?
Call our Techstore
on 0800 452 922

Description

Intelligent yet lightweight, this solar controller uses Pulse Width Modulation (PWM) to control battery charging. With total autonomy, its set-and-forget operation means you can get maximum charge into your batteries from your solar installation without having to worry about those things. It provides all the important safety features such as overload, short-circuit, over-discharge, and reverse-polarity protection. A handy feature is also the USB port located on the front panel, to provide up to 1.2A charging. Very handy during power outages to keep your phone charged without any additional equipment. Charge modes include bulk, equalise, and float charging, and the unit automatically switches to the best charging mode. Suitable for sealed led acid, as well as Gel/flooded type cells.

Features:
- Automatic charge mode selection
- Suitable for 12V and 24V battery banks
- USB charging port on front panel
- Charging Modes: Bulk, Equalise, Float
- Supports: Sealed, Gel and Flooded
- USB Output: 5V @ 1.2A

Specifications

Solar Charge Controllers and Regulators

Charge Controller Technology	Pulse Width Modulated (PWM)
Max PV Open Circuit Voltage	50V
Max Charging Current	20A
Max Load Current	20A
Max Solar Panel Array	240W-480W

DC Current Rating

DC current rating

20A

DC Voltage Rating

DC Voltage

12V,24V

Product Dimensions

Width	86mm
Height	35mm
Weight	160g
Length	148mm

Included USB Charge Output

Total Current Rating	1.2A
Number of Ports	1pc

Low Voltage Power / Vehicle Adaptors

Input Type	Screw Terminal
Output Type	Screw Terminal

Ingress Protection Rating

IP Rating	IP20
Dust/Particle Ingress Protection	2 - Objects > 12.5mm, Fingers or small objects
Liquid/Moisture Ingress Protection	0 - Not protected

Operating Temperature

-35°C-55°C

Warranty: 12 Months

Downloads

Download Manual

12/24V 20A Solar Charge Controller with USB

CAT.NO: MP3752

12/24V 20A Solar Charge Controller with USB

CAT.NO: MP3752

15% Off Orders Over $60Nerd Perks Only

Shipment & Delivery Information

Parcel Lockers

15% Off Orders Over $60
Nerd Perks Only