text.skipToContent text.skipToNavigation

COVID-19 & Shipping Updates

In line with government guidelines, all Jaycar company-owned stores are open to all customers. We encourage all customers to take advantage of free delivery for online orders over $99. We thank you for your support as we continue try to keep our community and stores safe. See here for the latest on delivery delays.

12/24V 10A Dual Battery PWM Solar Charge Controller with LED Indicator 12/24V 10A Dual Battery PWM Solar Charge Controller with LED Indicator MP3760 69.90 In stock

12/24V 10A Dual Battery PWM Solar Charge Controller with LED Indicator

CAT.NO:MP3760

12/24V 10A Dual Battery PWM Solar Charge Controller with LED Indicator

CAT.NO:  MP3760

Will charge TWO house battery banks or one house bank and your motor start battery.
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

Notify me when on special
	
$69.90
Bulk Pricing:
1-1 $69.90
2-3 $62.90
4+ $55.90
In Stock



Description
2 Year Warranty

We have many solar battery charger controllers - up to 50A - but they only work on one battery bank. This unit will charge TWO house battery banks or one house bank and your motor start battery as well. Too often the motor start battery is forgotten if you are camped in the one spot for a long time. 

Features: 
Will charge 2 completely separate battery banks at the same time
Highly efficient PWM (Pulse-width modulation) charging system
Electronic protection from over charging short circuit or accidental reverse battery connection
Max solar input voltage: 30V (12V system), 55V (24V system)
Battery input voltage range: 8-15V (12V system), 8-30V (24V system)
Overnight self-consumption: 4mA

Recommended solar panel to utilise output of this controller. ZM9059, 8.3A unit. (Note output of this controller is limited by the current output of the solar panel feeding it).

 

 


Handy Tip Solar Charge Controllers

Directly connecting a solar panel or array to a battery can be catastrophic as solar panels can output a wide voltage range. As an example, a nominal 12 volt rated panel can output anything up to 22volts during an average sunny day. A solar charge controller between the panel and the battery ensures the battery receives the correct output voltage and current from the panel to minimise the risk of the battery being overcharged or discharging back into the panels. Charge controllers come in a variety of types which give different performance and can be matched to simple recreational applications all the way up to complex high power solar array installations.

SWITCHING: Simple switching controllers connect the panel to the battery when the panel is providing power & the battery is not fully charged. This type of controller is low cost and only good for basic solar equipment setups such as standby lighting, etc. where the panel yield is far higher than the load requires. PWM: Pulse width modulated (PWM) controllers continually apply voltage pulses to the battery whenever the panel is providing sufficient voltage. The pulse width (or duration) is varied by the controller depending on the charge state of the battery to ensure the correct amount of charge is harvested from the panel whenever it is available. As a result, PWMc ontrollers provide a much higher power yield than simple switching controllers.

MPPT: Maximum power point tracking (MPPT) controllers maximize power conversion between the panel output and the battery input by using a DC to DC switchmode power converter. By continuously tracking the panel output and adjusting the converter they yield the maximum amount of power under widely varying solar conditions. MPPT controllers give the best solar system efficiency and improve solar system power yield by a significant percentage. Both PWM and MPPT controllers are available with display panels which allow you to track performance of the solar system. Panel voltage, battery voltage, charging current, and total charge supplied can be easily displayed so you can ensure the system is running correctly. More complex models also include integration functions to remotely control other equipment or be linked into advanced systems.

Specifications
Product Dimensions

Width 153mm
Height 76mm
Depth 37mm
Weight 240g
Solar Charge Controllers and Regulators

Charge Controller Technology Pulse Width Modulated (PWM)
Vehicle or Vessel Powered

Current Draw 10A
Required Voltage 12V
Warranty: 24 Months
Downloads
Articles


DELIVERY

✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-3 days for most areas in the North Island and 3-5 for the South Island
 

CHECK IN-STORE