100k Ohm Logarithmic (A) Single Gang 24mm Potentiometer

CAT.NO: RP3618

100k Ohm Logarithmic (A) Single Gang 24mm Potentiometer

CAT.NO: RP3618

With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter types . Pow...

Shipping & Delivery Information

Shipment & Delivery Information

Your order can be delivered throughout New Zealand. Delivery cost is calculated based on your cart dollar value.

Auckland: 1-2 working days*

Up to $199.99 $5.00
$200 - $499.99 $8.00
$500+ $10.00

North Island: 2-5 working days*

Up to $99.99 $5.00
$100 - $199.99 $6.00
$200 - $499.99 $8.00
$500+ $9.00

South Island: 2-5 working days*
Up to $99.99 $5.00
$100 - $199.99 $8.00
$200 - $499.99 $13.00
$500+ $18.00

*Freight delivery times stated are for average volume items with total order weight under 5kg. Additional delivery time may result for some deliveries. Contact the Techstore should you require more details.

Delivery addresses
• Goods cannot be delivered to a post office box
• Company policy is that we do not under any circumstances issue instructions to our couriers to leave deliveries unattended when no one is at the delivery location
Heavy Goods
• For unusually large or bulky orders our customer service staff may contact you if any additional freight costs are needed.
Transit Goods Insurance
If you wish to insure, it will cost $1 for every $100 value or PART THEREOF. In other words if your order is for $145.00 the insurance will be $2.00. This insurance covers goods DAMAGED in transit. We do not automatically insure unless you specify it during the checkout. If you don't select insurance you are NOT insured.

$3.65

Bulk Pricing:

1-9	$3.65
10-49	$2.90
50+	$2.55

In Stock

Quantity

Have a question about placing your order?
Call our Techstore
on 0800 452 922

Description

With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter types . Power rating is 0.5W max. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is a generous 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.Value100K