text.skipToContent text.skipToNavigation
1/10 Scale R/C Car Brushless Motor / ESC Upgrade 1/10 Scale R/C Car Brushless Motor / ESC Upgrade GT3675 42.20

1/10 Scale R/C Car Brushless Motor / ESC Upgrade

CAT.NO: GT3675

Add to wishlist
WAS $139.00 Save $96.80
Bulk Pricing:
1-2 $42.20
3-5 $42.20
6+ $42.20
Out Of Stock

Have a question about placing your order?
Call our Techstore
on 0800 452 922

Add serious tyre-shredding, wheel-standing horsepower to your 1/10 scale electric R/C car. This is the electrical equivalent of putting a supercharged-427 in a Datsun 180B. The kit comprises two parts - a brushless motor and electronic speed controller (ESC). Installation is easy in our GT-3670 or GT-3672 R/C cars, or any 1/10 scale car RC racing car for that matter. Electrical termination for the battery is by flying leads so you can add your own connectors to suit (we recommend our PT-4450), and high-spec gold connectors are used for connection to the motor. This brushless motor and ESC combination can be powered by a normal 7.2V Ni-MH RC battery pack, but we seriously recommend using our SB-2310 3300mAH 7.4V LiPO battery pack to get the most from this serious upgrade to your RC car.See our website for a video demo of the awesome performance of this upgrade in the Jaycar carpark.

Motor Specifications:

• Standard RC540 size motor (36mm x 50mm)
• Brushless motor - 3300 rpm/Volt
• Shaft Diameter - 3.175mm (1/8)

Electronic Speed Controller Specifications:

• Low battery voltage cut-off to protect LiPO batteries from damage
• Over temperature protection
• Max current - 75A
• Battery Input - 7.2V Ni-MH, or 7.4V Li-Po

GT-3675 - Brushless Motor Video in action. Installed in GT-3670.

Packaged Volume 0.9716L,0.97155l
Packaged Weight 0.27kg
Packaged Length 17cm
Packaged Width 12.7cm
Packaged Height 4.5cm
Warranty: 3 Months