Stores | Contact Us | Customer Service | Primers
Tools, Components & Cable
Power & Energy
Ecotech Power and Lighting
Kits, Science & Learning
Audio & Video
IT & Comms
Security & Surveillance
Auto & Outdoors
Gadgets
Techstore Specials
Free Call Order Line
  • 0800 452 922
Email

Jaycar Stores
Search browse
disp $NZD   
Register click here
Email Here
Password Here

*IMPORTANT! Currently not logged in.
Please login or register now
Tools, Components & Cable > Passive Components > Resistors > Potentiometers
 
CAT. NO. RP3618
  RRP $2.80
100K 24mm Potentiometer Log Single Gang (A)
 
CLICK TO ENLARGE
CLICK TO ENLARGE


100K 24mm Potentiometer Log Single Gang (A)

With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter types . Power rating Linear 0.5W and Log 0.25W. Maximum operating voltage Linear 500V and Log 250V. They have genuine 6.35mm (1/4") shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is a generous 38mm long. The bush is a 3/8" 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.Value100K

  QTY  
  1+ $2.80
  10+ $2.10
  50+ $1.90
  Enter Quantity
<< RETURN
[ Top of Page ]  
 
About Us | E-newsletter | Forums | Primers | Semiconductor Data | Terms & Conditions | Disclaimer | Sitemap