Stores | Contact Us | Customer Service | Primers
Tools, Components & Cable
Power & Energy
Ecotech Power and Lighting
Kits, Science & Learning
Audio & Video
IT & Comms
Security & Surveillance
Auto & Outdoors
Techstore Specials
Free Call Order Line
  • 0800 452 922

Jaycar Stores
Search browse
disp $NZD   
Register click here
Email Here
Password Here

*IMPORTANT! Currently not logged in.
Please login or register now
Tools, Components & Cable > Interconnect > Terminals & Headers > Imperial Locking Headers
CAT. NO. HM3406
  RRP $0.90
6 Pin 0.1 Header with Crimp Pins - 2.54 pitch

6 Pin 0.1 Header with Crimp Pins - 2.54 pitch

A range of connectors for PCB mounting that allow circuit boards to be plugged together at right angles or end-to-end, or cables to be plugged onto circuit boards at right angles or end-on at the edge of the PCB. Both plugs and sockets may be butted up end-to-end to form connectors with any number of ways from 2 upwards.

Both plugs are wafer design into which square, tin-plated brass pins have been inserted. These pins protrude 3.4mm on one side, and should be soldered to the PCB. The nylon wafer sits on the PCB and is 3.3mm thick. The back provides locking and polarising.

• 0.9mm PCB drill hole

Voltage: 250V
Current: brass crimp/tin plated: 2.5A max (solderable)
Contact resistance: 20mΩ max
Dielectric withstanding voltage: 1500VAC
Insulation resistance: 50MΩ
Contact insertion force: 681g
Contact rentention to housing: 3.63kg
Mating force: 199g max
Normal force: 200g min
Housing: UL 94v-0 white nylon
Temperature: 0 to +75°C
  1+ $0.90
  4+ $0.80
  10+ $0.70
  Enter Quantity
[ Top of Page ]  
About Us | E-newsletter | Forums | Primers | Semiconductor Data | Terms & Conditions | Disclaimer | Sitemap