Stores | Contact Us | Customer Service | Primers
Tools, Components & Cable
Power & Energy
Ecotech Power and Lighting
Kits, Science & Learning
Audio & Video
IT & Comms
Security & Surveillance
Auto & Outdoors
Gadgets
Techstore Specials
Free Call Order Line
  • 0800 452 922
Email

Jaycar Stores
Search browse
disp $NZD   
Register click here
Email Here
Password Here

*IMPORTANT! Currently not logged in.
Please login or register now
Tools, Components & Cable > Electromechanical Components > Heatsinks & Accessories > Structural
 
CAT. NO. HH8530
  RRP $27.00
Fan Assisted-Type Heatsink - 225mm Long
 
CLICK TO ENLARGE


Fan Assisted-Type Heatsink - 225mm Long

This heatsink is designed to mate with itself to form a tunnel. The heatsink extrusion has "screw flute" centre to enable 4 x No.6 self- tapping screws to fasten an 80mm standard type fan on one (or both)
end/s to drive air through the heatsink assembly. It is ideal for high power amplifiers and power
supplies. The entire assembly, including fan/s can still fit inside a 2 x Rackunit (88mm) enclosure. The
heatsink also features ribbed fins for extra surface area, a 4mm thick base to enable thread tapping
and small vee grooves on 5mm centres to facilitate mounting hole location. The centre groove, for
example, is directly below the middle fin. Two standard lengths are available, black anodised. We can, however, custom cut any length in quantity. OEMs, contact us for bulk prices.

Thermal Characteristics:

Assembly Type Cooling Mode Rating (approx)
Single Length Convection 0.83 C/W
Tunnel Assembly Convection 0.70 C/W
Tunnel Assembly Fan Assisted (single) 0.35 C/W
Tunnel Assembly Fan Assisted (dual) 0.30 C/W

Suitable fans are YX- 2512 (12V DC) or YX- 2510 (240V AC).

Note: 2 heatsinks pictured
length 225mm
  QTY  
  1+ $27.00
  4+ $23.90
  10+ $21.30
  Enter Quantity
<< RETURN
[ Top of Page ]  
 
About Us | E-newsletter | Forums | Primers | Semiconductor Data | Terms & Conditions | Disclaimer | Sitemap